10. Advanced Use; System Requirements; Download And Install Software; Set Up The Wireless Network - HandHeld SP400X Series System Administrator Manual

10. Advanced use

System requirements

• SP400X device and accessories
• Wireless network and server application
• Computer with the following installed on it:
• Windows ® XP and Service Pack 2
• Microsoft .NeT framework 2.0 or later
®
• Handheld SP400XX Series Configuration Software
• Handheld SP400XX Series Template Design Software
• USB-compliant cable that does not exceed three meters (10 feet) in length, with a type B 5-pin plug at one end to connect to the
SP400X's port
NOTE: If you are connected to the internet when you install the software and you do not have .NeT framework installed on your computer,
.NeT framework will automatically be downloaded and installed.

Download and install software

Two software programs are required to configure the SP400X:
• Handheld SP400XX Series Configuration Software
• Handheld SP400XX Series Template Design Software
To download this software, visit www.handheldgroup.com/manuals.

Set up the wireless network

802.11b wireless

1. Connect the SP400X to a computer with a USB cable.
2. Use the Handheld SP400X Series Configuration Software to configure the 802.11b settings.
"DOWNlOAD AND INsTAll
See
3. Select the Network tab and configure the SP400X to connect to your 802.11 network.
4. Select the Server tab and configure the SP400X to connect to your application server.
NOTE: See the Handheld SP400XX Series Configuration Software Users Guide for more detailed instructions and help.
It is available at www.handheldgroup.com/manuals.
sOfTWARE."
SP400X Series - 10. Advanced use
48