Replace The Battery Cable; Replace The Finger Strap - HandHeld SP400X Series System Administrator Manual

Replace the battery cable

1. Remove the hand mount from the SP400X. See
2. Remove the battery cable by lifting up.
3. Insert a new battery cable..
4. Reinstall the hand mount.

Replace the finger strap

1. Remove the hand mount. See
2. Remove the finger strap by lifting the old buckles out of the notches.
1 Buckle
2 Strap
3. Insert a new finger strap by snapping each buckle into its notch.
4. Reinstall the hand mount.
"REMOvE THE HAND MOUNT OR HANDlE
"REMOvE THE HAND MOUNT OR HANDlE
SP400X Series - 8. Maintain the SP400X
ACCEssORy" above.
ACCEssORy."
32