Set Up The Sp400X; Install The Battery Cable; Assemble The Hand Mount Or Handle Accessory - HandHeld SP400X Series System Administrator Manual

SP400X Series - 3. Set up the SP400X

3. Set up the SP400X

Install the battery cable

Insert the battery cable into the bottom of the hand mount, as shown.

Assemble the hand mount or handle accessory

1.Align the hand mount with the SP400X as shown.
2. Slide the hand mount until it clicks into place.
IMPORTANT:
If you are using the handle accessory instead of the hand mount,
see the instructions that were included with the handle accessory.
11