Clean The Sp400X; Cleaning Materials; Clean Outside Surfaces; Clean The Imager Window - HandHeld SP400X Series System Administrator Manual

Clean the SP400X

CAUTION:
Unplug the battery from the SP400X before doing any cleaning procedure.
CAUTION:
Never spray or douse the SP400X with any liquid. Use only dampened wipes, cloths, or swabs to clean the SP400X.
IMPORTANT: Use only materials from the list below to clean the SP400X (see
may damage the plastic, paint, or the adhesives used in the SP400X.

Cleaning materials

The following materials may be used to clean the SP400X:
• Cotton cloths
• Cotton swabs
• Baby wipes
• Deionized water
• Eyeglass cleaning wipes (anti-static and anti-fog types only)

Clean outside surfaces

Use a cotton cloth dampened with water to clean the outside surfaces of the SP400X.
• To remove difficult material, such as gummy adhesive or built-up grime, use a cotton cloth dampened with deionized water or use a
baby wipe, and dry with a dry cotton cloth.
• To clean hard-to-reach places, such as the cooling ribs of the case, use cotton swabs dampened with deionized water.

Clean the imager window

Use eyeglass cleaning wipes to clean the imager window. eyeglass cleaning wipes provide the best anti-glare cleaning solution.
• Be sure to wipe away any build-up from the center area of the imager window.
• Cotton swabs may be used to lightly remove smudges from the window edges.
NOTE: If eyeglass cleaning wipes are not available, use a cotton swab dampened with deionized water to clean the imager window.
SP400X Series - 8. Maintain the SP400X
"ClEANINg MATERIAls" below). other solvents or cleaners
30