Mitel MiVoice 6930 User Manual page 37

choose the initial audio path used when pressing the
audio path options that you can select:
Audio path
Speaker
Headset
To configure the audio path:
1. Press the (Settings) key to enter the Settings menu.
2. Navigate to the Audio > Audio Path setting and press the Select button or Select softkey.
3. Use the up and down navigation keys to select the applicable audio path (Speaker or Headset).
Note: If you select the Headset option, ensure that only one headset is connected to the phone.
4. Press the Save softkey to save your changes.
Description
The default setting. When using the handset, pressing the
(Speaker/Headset) key on the phone switches to the speakerphone. Pressing
the (Speaker/Headset) key again switches to the headset (if
connected). When using the speakerphone or headset, lift the handset to switch
to the handset.
When using the handset, pressing the
phone switches to the headset. Pressing the
again switches to the speakerphone. When using the headset or
speakerphone, lift the handset to switch to the handset.
Customizing your phone
(Speaker/Headset) key. There are two
(Speaker/Headset) key on the
(Speaker/Headset) key
35