Led Status; Replacing The Integrated Dect Headset; Mitel S720 Bluetooth Speakerphone - Mitel MiVoice 6930 User Manual

Mitel MiVoice 6930 IP Phone User Guide

LED status

LED
INDICATOR
Note: For how to install the Mitel DECT Headset to your 6930 IP phone or the Mitel M695
Programmable Key Module, see the Mitel Integrated DECT Headset Installation Guide.

Replacing the Integrated DECT Headset

If the Integrated DECT Headset is malfunctioning, or if you have paired a wrong Integrated DECT
Headset with the base, you must replace or repair the Integrated DECT Headset.
To replace or repair the Integrated DECT Headset:
1. Remove the headset from the base.
2. Turn off the headset by pressing the Answer/end button for 10 seconds until the LED indicator
stops flashing.
3. Dock the new headset in the base. The new headset is paired with the base after 1 minute.

Mitel S720 Bluetooth Speakerphone

The Mitel MiVoice 6930 IP phone provides support for the optional Mitel S720 Bluetooth
Speakerphone. Once paired with the Mitel MiVoice 6930 IP phone, you can receive calls on the
Mitel S720 Bluetooth Speakerphone. The Mitel S720 Bluetooth Speakerphone can be placed (on
its base or upright using a table stand) on your work desk or in a small-to-medium conference room.
116
DESCRIPTION
Battery charging (Green - slow flash)
Full battery (Green)
Medium battery (Yellow)
Low battery (Red)
Very low battery (Red - flashing)
Unknown battery status (White)
Microphone muted
Active audio between headset and base
Searching for headset (flashing)
Answer/end button
LED indicator