1. Ensure that you have selected the Headset audio path (see
2. Turn the phone over and, depending on the type of headset, locate the headset jack marked f
or the USB port.
a. If you have a USB headset, insert the headset's USB plug into the USB port.
b. If you have a headset with an RJ9/RJ22 4-pin connector, insert the headset cord into the
jack until it clicks into place.
c. If you have a DHSG/EHS headset with an RJ45 6-pin or 8-pin connector, remove the plastic
headset jack adapter and then insert the cord into the jack until it clicks into place.
Note: See the Mitel MiVoice 6930 IP Phone Installation Guide for more information.
Accessory support
"Audio Path"
on
page
34).
123