Johnson Level & Tool JLX 5700D Instruction Manual page 11

2842i_Manuals 4/27/18 2:08 PM Page 11
Set Customized Reference Angle
For some applications, it might be useful to set a reference other
than 0°. Once the level is in either 22.5° or 45.0° mode, follow these
steps to set your customized reference angle. If the level is inactive
for five seconds during any of these steps, the level will return to the
measuring mode.
1. Tap
sub-display will begin to flash.
2. Tap
through the following digit options, where the bolded digit is the
one to be set.
3. To set the selected digit, press and hold
options of 0 through 9.
4. After five seconds of inactivity, the level will return to the
measuring mode.
Turn On/Off the Backlight
Both the main display and the top-read display are equipped with a
backlight feature. The backlight feature has three options: off, 50%
and 100%.
1. With the level powered on, tap
feature. The backlight will be set to 50%.
©2018 Johnson Level & Tool
and simultaneously. The rightmost digit in the
to select the digit to set; continuing to tap
88.88
88.88
88.88
88.88
will scroll
to scroll through the
to activate the backlight
11