Tying The Unit Down - Generac Power Systems LINKTower PLT240 Owner's Manual

General Information
See Figure 2-8. The chassis is equipped with a
swiveling caster at the rear. Step on the brake (E) to lock
the caster and prevent the wheel from rotating. Raise the
brake to unlock the caster.
E
003515
Figure 2-8. Swiveling Caster

Tying the Unit Down

When securing the unit for transportation, verify the
equipment being used to fasten the unit is in good
condition and has sufficient strength to hold the unit in
place during transport.
See Figure 2-6. Tie-down straps, ropes, or chains may
be passed through the forklift pockets (B). The holes in
the forklift pockets may also be used to secure the unit
for transport.
Owner's Manual for PLT240 Light Tower 11