Tying The Unit Down - Generac Power Systems MAGNUM MLT6SM Owner's Manual

A
B
Figure 3-22. Lifting Points
• Use the forklift pockets (B) with care. Lift directly
from the rear. Avoid approaching the unit at an
angle, as this can permanently damage the forklift
pockets, tires, or cabinet. Verify any obstructions
are clear of the forklift tines before lifting.

Tying the Unit Down

When securing the unit for transportation, verify the
equipment being used to fasten the unit is in good
condition and has sufficient strength to hold the unit in
place during transport.
Figure 3-23. Use the tie-down points (C) as shown.
See
Figure 3-23. Tie-Down Points
Owner's Manual for MLT6SM/6SK Light Tower
006456
002538
C
Operation
37