Omron V750-BA50C04-US Operation Manual page 57

3.1.5 Command Specification
3.1.5.1 Communication Command
A communication command consists of parameter(s) mandated for command execution and option specified if
necessary. Following table shows parameters as an argument of each command and available options.
Parameters and Options for Communication Commands
Command Data
Command Code
Read ID RDID
Write ID WTID
Read Data RDDT
Write Data WTDT
Lock LOCK
Kill KILL
- All options can be omitted. If option(s) is omitted, the default value is applied depending on the option item.
- Kill command requires the option item "-pwd" (if the "–pwd" is not used in command, 7Fxx error will occur.)
To set parameters, items in the following list shall be chosen and be described in to the command one's way
down the list.
Parameter Details
Parameter
Memory bank
Data pointer
Data length
Write data
V750 RFID READER/WRITER, ANTENNA
OPERATION MANUAL
Parameter (mandatory)
Yes Yes Yes
Yes Yes
Memory bank of a GEN2 tag for "Read Data" or "Write Data" shall be
specified with the following number in decimal or hexadecimal (begins with
0x) format.
･ 0 or 0x00: Reserved Area
･ 1 or 0x01: EPC Area
･ 2 or 0x02: TID Area
･ 3 or 0x03: User Area
Memory address in the memory bank of the GEN2 tag for "Read Data" or
"Write Data" shall be specified with number(s) in the following range in
decimal or hexadecimal (begins with 0x) format.
･ Min: 0 or 0x00
･ Max: 255 or 0xFF
Memory size to be accessed for "Read Data" shall be specified with the
number(s) in the following range in decimal or hexadecimal (begins with 0x)
format.
･ Min: 0 or 0x00
･ Max: 32 or 0x20
To write data into a tag with "Write ID" or "Write Data" command, the data
-seq
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Setting value
57 of 110
Option
-ant -tmo -tif
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
©OMRON CORPORATION 2006
-pwd -ptc
Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
2006-06, REV.C