File Management In The Plc Partition - HEIDENHAIN iTNC 530 HSCI Service Manual

13.8 File management in the PLC partition

Calling the
PLC partition
Figure: Program management of iTNC 530 HSCI
The directory structure is displayed on the left side, the associated files are listed on the right.
With the +/- key or with ENTER you can open and close subdirectories.
February 2012
Select the Programming and Editing operating mode.
If open: Close the program management by pressing the END button.
Note
Pressing the MOD key while the program manager is open calls screen where you can make the
interface settings.
Call the code number window.
The PLC main page is displayed.
Note
If the dialog READONLY appears on the left side of the screen, the machine manufacturer has
protected the PLC partition with his own code number. As a result, the OEM.SYS system file
can no longer be called. All other PLC files can still be read but not edited any more.
Call the Program Management.
Enter and confirm the code number.
13 – 177