12.1.3 Calling and operating the HSCI bus diagnosis
This screen shows the structure of the HSCI system together with details on the HSCI components.
12 – 148
Select the Programming and Editing operating mode.
If open: Close the program management by pressing the END button.
Note
Pressing the MOD key while the program manager is open calls screen where you can make the
interface settings.
Press the MOD key.
Press the DIAGNOSIS soft key.
Press the BUS DIAGNOSIS soft key.
Press the HSCI soft key. --> A new window opens.
You can open and close the tree structure on the left side of the window with the arrow keys or
the mouse.
Navigation is also effected with the arrow keys or a mouse.
HEIDENHAIN Service Manual iTNC 530 HSCI