Settings In The Program Manager - HEIDENHAIN iTNC 530 HSCI Service Manual

13.6 Settings in the program manager

The iTNC 530 HSCI offers several possibilities of setting the program manager.
PGM MGT setting
Enhanced 2
Enhanced 1
Standard
You can change these settings as follows:
13 – 174
Select the Programming and Editing operating mode.
(The program manager should not be open).
Call the code number window..
Call the interface setups. Here you also find the setting for the program manager.
The following window appears:
Place the cursor in the line PGM MGT.
Press the GOTO key. --> A selection window opens.
Select a setting and confirm with the ENT key.
Leave the settings page with the END soft key or the END key.
Note
For the descriptions in this iTNC 530 HSCI Service Manual the program manager was set to
Enhanced 1.
Advantages, e.g.
Complete mouse function, adjustable window sizes
Frequently used setting
Display as with old HEIDENHAIN controls
HEIDENHAIN Service Manual iTNC 530 HSCI