Table of Contents
Advertisement
Chapter 3
The Menu System
You can use the fixture's onboard menu system to configure and test the
trackspot Bolt fixture.
The onboard trackspot Bolt menu system allows you to:
• Assign a DMX start channel.
• Access fixture options such as homing the fixture, viewing fixture status, and performing
self tests.
• View all DMX values on the link.
• Identify fixture errors.
Navigating the Menu System
After homing, The LED screen will display HES, BOLT, the software version in the form V
Major.minor (V1.1 for example), the DMX address in the C### format, and, if the defog fan is
running, DEFG.
You can access and navigate the
menu system via the four menu
navigation buttons on the
fixture's front panel.
The LED display shows the menu
items you select from the menu
map. When accessing fixture
options, the display will flash
when a new option is selected
(by pressing the <Up> or
<Down> arrow buttons), and
stops flashing when a new
option is stored (by pressing the
<Enter> button).
To access the menu system: press and hold the <Menu> button until AddR appears on the
display. The menu system is protected against inadvertent menu changes by requiring the
<Menu> button to be held for a few seconds before allowing entry to the menu system.
To return to the previous option or menu without changing the value: press the
<Menu> button.
trackspot
Bolt User Manual
®
MENU button unlocks
the menu and backs
through menu levels
UP and DOWN
arrows scroll to
a value or option
ENTER button
selects an option
or a menu value
15
Advertisement
Table of Contents
