Rotating Gobo Rotate Function; Rotating Gobo Rotate Coarse/Rotating Gobo Rotate Fine; Focus; Iris - High End Systems trackspot Bolt User Manual

CHAPTER 4
Fixture Programming

Rotating Gobo Rotate Function

The Rotating Gobo Function parameter setting determines how the individual aperture
wheels on the Rotating Gobo Wheel move.
Gobo Rotate Function
Indexed
Forward Rotate
Reverse Rotate
Blink
Forward Animate Rotate
Reverse Animate Rotate
You can select either full speed or MSpeed (MSpeed control of the wheel motor) mode to control
the motor speed of the function you choose. For more information on MSpeed, See MSpeed
(Motor Speed) on page 35.

Rotating Gobo Rotate Coarse/Rotating Gobo Rotate Fine

When the Rotating Gobo Function channel is set to Indexed or Blink, these two channels
allows for 16-bit adjustment to the Rotating Gobo Wheel aperture position.
When a rotate option is selected in the Rotating Gobo Function parameter, the Rotating
Gobo Rotate Coarse parameter sets the selected aperture's rotation speed from the slowest at
a DMX value = 0 to the fastest at a DMX value = 255.

Focus

This parameter gives you control of the focus range.When the controller DMX value = 0, the
focus is fully out. Increasing the value gradually moves the focus in to the maximum at a DMX
value = 255.

Iris

This parameter controls the movement of the Iris. When the controller DMX value = 0, the iris is
closed. Increasing the value gradually opens the iris until it is fully open at a DMX value = 255.

Shutter

The Shutter channel lets you select periodic strobing from slow to fast.
34
Rotates the specified indexed aperture to any position
Forward aperture rotation from slowest to fastest
Reverse aperture rotation from slowest to fastest
Closes and opens the shutter on rotate position changes
Forward aperture rotation in strobing steps
Reverse aperture rotation in strobing step
Description
trackspot Bolt User Manual
®