CHAPTER 4
Fixture Programming
Static Gobo Wheel
Static Gobo Function
This parameter provides options for how you control the wheelspin and gobo selection on the
Static Gobo Wheel.
Static Gobo Function
Indexed
Forward Spin
Reverse Spin
Continuous
Slow Scan
Fast Scan
Random
Blink
Note: You can access the transition patterns using the continuous Gobo function.
You can select either full speed or MSpeed (MSpeed control of the wheel motor) mode to control
the motor speed of the function you choose. For more information on MSpeed, See MSpeed
(Motor Speed) on page 35.
Static Gobo Position
This parameter lets you select from seven anamorphic patterns plus open on the Static Gobo
.
Wheel
Position Description
1
Open
2
Crosshatch
3
Stars
4
Tunnel
5
Foliage
6
Bolt
7
Bars
8
Burst
32
Takes the quickest path and snaps to the chosen gobo position on the wheel.
Spins the wheel forward through the gobo positions at variable speeds.
Spins the wheel in reverse through the gobo positions at variable speeds.
Rotates the wheel to any position within 360°
Performs a scan of one gobo position from each side at a slow rate
Performs a scan of one gobo position from each side at a fast rate
Selects random gobo positions at variable speeds.
Closes and opens the shutter between indexed gobo position changes.
8
7
6
Description
1
4
5
trackspot
2
3
Bolt User Manual
®