Vigtig Fikker Heds Information - Danmark; Mounting The Trackspot Bolt Fixture - High End Systems trackspot Bolt User Manual

CHAPTER 2
Installation and Setup
Since the colors of the cores in the mains lead of this equipment may not correspond with the
colored markings identifying the terminals in your plug, proceed as follows:
• The core which is colored green and yellow must be connected to the terminal in the plug
which is marked with the letter "E" or by the earth symbol
and yellow
• The core which is colored blue must be connected to the terminal which is marked with the
letter "N" or colored black
• The core which is colored brown must be connected to the terminal which is marked with
the letter "L" or colored red
CAUTION: Class 1 equipment. This equipment must be earthed

VIGTIG FIKKER HEDS INFORMATION - DANMARK

ADVARSEI: RESKYTTEKSE MOD ELEKTRISK SHOCK
VIGTIGT!
LEDERE MED GROEN/GUL ISOLATION
MA KUN TILSLUTTES EN KLEMME MAERKET
ELLER =

Mounting the trackspot Bolt Fixture

WARNING!
Equipment suitable for dry locations only. Do not expose this
equipment to rain or moisture.
This equipment must be earthed.
CAUTION!
Always use a secondary safety cable through the yoke when
mounting this fixture.
1 m
Mount the fixtures and controllers in a location that is away
from direct heat and protected from moisture.
Maintain a minimum focus distance of 1 meter.
Do not mount within 1 meter of a flammable surface.
8
, or colored green or green
trackspot Bolt User Manual
®