Control Settings - High End Systems trackspot Bolt User Manual

CHAPTER 4
Fixture Programming

Control Settings

The Control parameter activates certain Fixture functions. To access all trackspot Bolt Control
settings (except for Pan & Tilt MSpeed Off), first select a control channel value, then set the
Shutter channel to "0."
NOTE: The Control channel should not be crossfaded.
Control Setting
Safe
Pan & Tilt MSpeed Off
Display Off
Display On
Home All
Shutdown
36
Disables all Control settings for normal operation.
Sets Pan & Tilt MSpeed to ignore MSpeed settings.
Sets display to off.
Turns on the display.
Remotely homes the fixture.
Remotely deactivates the fixture.
Description
Set Shutter parameter = 0 to
access these control options.
The Control channel should
return to Safe mode after the
desired command is issued.
trackspot Bolt User Manual
®