Dmx Parameters For Trackspot Bolt Fixtures; Pan And Tilt - High End Systems trackspot Bolt User Manual

CHAPTER 4
Fixture Programming

DMX Parameters for trackspot Bolt Fixtures

DMX console libraries define parameters for the following trackspot Bolt functions over a
21-channel range (Standard protocol) or 20-channel range (Reduced protocol). DMX libraries
are copyrighted and available in High End Systems consoles.
Standard Protocol
Channel Function
1
Pan
2
3
Tilt
4
5 Static Color Function
6 Static Color Position
7 Static Gobo Function
8 Static Gobo Position
9 Rotating Gobo Function
10 Rotating Gobo Position
11 Rotating Gobo Rotate Function
12
Rotating Gobo Rotate
13
14 Focus
15 Iris
16 Shutter
17
Dim
18
19 MSpeed
20 Macro
21 Control
For more information on developing libraries for DMX consoles from other manufacturers,
contact High End Systems.

Pan and Tilt

The Pan and Tilt parameters control the trackspot Bolt fixture's 150° pan range and 110° tilt
range. Pan and Tilt functions each utilize two channels to provide 16 bit adjustment to a fraction
of a degree.
Pan and Tilt motion can be controlled with MSpeed values, (see MSpeed (Motor Speed) on page
35). If you choose to use MSpeed for color or gobo changes without affecting Pan and Tilt
parameters, set Pan/Tilt MSpeed OFF in the Control parameter.
30
Channel
Channel Function
1
Pan
2
3
Tilt
4
5 Static Color Function
6 Static Color Position
7 Static Gobo Function
8 Static Gobo Position
9 Rotating Gobo Function
10 Rotating Gobo Position
11 Rotating Gobo Rotate Function
12
Rotating Gobo Rotate
13
14 Focus
15 Iris
16 Shutter
17 Dim
18 MSpeed
19 Macro
20 Control
trackspot Bolt User Manual
®