Viewing Fixture Hours - High End Systems trackspot Bolt User Manual

CHAPTER 3
The Menu System
To view the fixture's minimum internal temperature (lowest ambient at power on):
1. Hold <MENU> until the display changes to AddR.
2. Using the up and down buttons, scroll to the INFO field and press <ENTER>.
3. Using the up and down buttons, scroll to the TEMP field and press <ENTER>.
4. Using the up and down buttons, scroll to the MIN field and press <ENTER>.
The fixture will display the minimum internal temperature followed by C (degrees
centigrade).
To view the fixture's maximum internal temperature (since the last reset):
1. Hold <MENU> until the display changes to AddR.
2. Using the up and down buttons, scroll to the INFO field and press <ENTER>.
3. Using the up and down buttons, scroll to the TEMP field and press <ENTER>.
4. Using the up and down buttons, scroll to the MAX field and press <ENTER>.
The fixture will display the maximum internal temperature followed by C (degrees
centigrade) for the CPU and the LPS locations.
To reset the minimum and maximum temperature readings:
1. Hold <MENU> until the display changes to AddR.
2. Using the up and down buttons, scroll to the INFO field and press <ENTER>.
3. Using the up and down buttons, scroll to the TEMP field and press <ENTER>.
4. Using the up and down buttons, scroll to the RST field and press <ENTER>. The display
flashes YES until <ENTER> is pressed, then displays HOLD while resetting and DONE after
resetting the maximum and minimum temperatures to the current internal temperature at
the CPU and LPS locations.

Viewing Fixture Hours

To view the time a fixture has spent turned on:
1. Hold <MENU> until the display changes to AddR.
2. Using the up and down buttons, scroll to the INFO field and press <ENTER>.
3. Using the up and down buttons, scroll to the F/HR field and press <ENTER>. The fixture will
display the total fixture hours.
Note: The display will indicate Hxxx for hours and M xx for minutes until
H999. When fixture hours exceed 999, the display will no longer
indicate minutes, instead it will use all four digits to display hours. If
the display indicates OVER, the counter has rolled over 9999 hours
and must be manually reset.
26 trackspot Bolt User Manual
®