Manual Milk Texturing; Long Black; Hot Water; Adding New Drink - Sage Barista Touch SES880 Quick Manual

MANUAL MILK TEXTURING

Auto milk texturing and auto shut-off are disabled
during manual milk texturing mode. Lift the steam
wand. Start frothing by touching the button. When
frothing is done, touch the Milk button to stop.
Wipe the wand & tip with a clean damp cloth.
Lower steam wand to the down position and the
wand will automatically purge.
CAUTION: BURN HAZARD
Pressurised steam can still be released, even after
machine has been switched off.
Children must always be supervised.
NOTE
• After 90 seconds of continuous steaming,
the machine will automatically disable the
steam function.
• Use exclusively the stainless steel milk jug
included in the pack to froth milk. The use of
container made of glass or plastic material to
froth milk may lead to dangerous conditions.

LONG BLACK

There are 3 preset Long Black settings –
Small (180ml), Medium (240ml), and Large
(360ml). Grind dose & tamp your portafilter & insert
into the group head. Position your cup underneath
the portafilter spouts & the hot water spout. The
hot water is delivered first, and espresso will be
extracted after that.

HOT WATER

The HOT WATER function can be used to
pre-heat cups or add hot water manually.
To start & stop hot water, touch 'Hot Water'
on the screen.
Hot water limit is approximately 90 seconds.
Depending on the size of your cup, you may need
to touch the 'Hot Water' button to stop pouring.
NOTE
You cannot run hot water and extract espresso
at the same time.

ADDING NEW DRINK

Touch 'Add New' in the menu screen to create
a customised drink. You can adjust parameters
based on a standard style and save your own.
Add New
Alternatively, after manually adjusting parameters
touch the small icon
setting.
TIPS
Ensure the drip tray is firmly pushed in place
and emptied whenever the Empty Me! indicator
is displayed.
AUTO OFF MODE
The machine automatically switches to AUTO OFF
mode after 30 minutes.
SETTINGS
To enter settings menu, touch the icon
on the upper right of the screen.
+
to save the current
EN
11