• Remove and discard any RECOMMENDS packaging materials safely, SAFETY FIRST before first use. • To eliminate a choking hazard At Sage we are very safety ® for young children, discard the conscious. We design and protective cover fitted to the manufacture appliances power plug safely.
Page 3
Sage Service Centre. • Fully unwind the power cord • The appliance can be used by before operating.
Page 4
• The use of attachments not apart from cold mains/town sold or recommended by water. We do not recommend Sage may cause fire, electric the use of highly filtered, shock or injury. de-mineralised or distilled • Always turn the appliance to...
Page 5
NOTICE TO CUSTOMERS SPECIFIC INSTRUCTIONS REGARDING MEMORY FOR WATER FILTER STORAGE • Filter cartridge should be kept out of reach of children. Please note that in order to better • Store filter cartridges in a dry serve our customers, internal memory storage has been place in the original packaging.
Components A. 250g bean hopper L. 2L removable water tank With locking system for easy removal, With replaceable water filters storage and transfer of coffee beans. to reduce scale and impurities. B. Integrated conical burr grinder M. Steam dial Selector control for steam and hot water. C.
Page 7
5. Cleaning disc BPA Free Materials* * Sage makes its BPA free claim for this product based on independent laboratory testing performed for all the food contact plastic materials of the product per EU Commission regulation No 10/2011. Rating Information...
Barista Pro Features INSTANT HOT WATER THERMOJET HEATING SYSTEM ™ Dedicated hot water outlet for making Innovative heating system achieves ideal Long Blacks and pre-heating cups. extraction temperature in 3 seconds. LOW PRESSURE PRE-INFUSION INTEGRATED CONICAL BURR GRINDER Applies low water pressure at the start Precision conical burrs maximise ground coffee of the extraction to gently expand grinds surface area for a full espresso flavour.
Assembly BEFORE FIRST USE NOTE Machine Preparation For replacement water filters, visit the Sage Remove and discard all labels and packaging webpage or contact Sage Customer Service. materials attached to your espresso machine. Ensure you have removed all parts and FILLING THE WATER TANK accessories before discarding the packaging.
Page 10
Assembly ATTACHING THE HOPPER FIRST USE CYCLE Insert the bean hopper into position on top A first use cycle must be completed before of the machine. the initial use of the machine. The first use cycle rinses the machine and primes the heating system.
Functions Regardless of whether you use Single Wall or TURNING OFF THE MACHINE Dual Wall filters baskets, use the 1 CUP basket To turn the machine off, press the POWER when brewing a single cup and the 2 CUP button. Alternatively, the machine has auto-off, basket when brewing two cups or a stronger if it is not used for 30 minutes.
Page 12
THE GRIND DOSING THE COFFEE When grinding coffee beans, the grind size • Fill the hopper with fresh coffee beans. should be fine, but not too fine. The grind size • Insert the required filter basket into the portafilter. will affect the rate at which water flows through •...
Page 13
TAMPING THE GROUND COFFEE • Rotate the Razor dose trimming tool back and ™ forth while holding the portafilter on an angle over • Remove the portafilter from the a knock box to trim off excess coffee grinds. Your grinding cradle. filter basket is now dosed with the correct amount •...
Page 14
EXTRACTING ESPRESSO • As a guide the espresso will start to flow after 8–12 seconds (infusion time) and should be the consistency of dripping honey. • If the espresso starts to flow after less than 7 seconds, you have either under dosed the filter basket and /or the grind is too coarse.
Page 15
PRE-PROGRAMMED SHOT PROGRAMMING ESPRESSO SHOT VOLUME – 1 CUP • Press the MENU button to enter the main menu. • Press the 1 CUP button once, the button will flash, indicating that it has been selected. The GRIND LOCK SHOT SHOT TEMP FASTER PRE-INFUSE...
Page 16
USING HOT WATER OUTLET • Lift the jug to lower the tip beneath the surface but keep the vortex spinning. The milk is at the The hot water function can be used to pre-heat correct temperature (60–65°C) when the jug cups or to add hot water manually.
Page 17
ADJUSTING CONICAL BURRS Some types of coffee may require a wider grind range to achieve an ideal extraction or brew. A feature of your Barista Pro is the ability to extend this range with an adjustable upper burr. ™ We recommend making only one adjustment at a time. Unlock hopper Hold hopper over container &...
FLUSH, then press to select. Replacement water filters can be purchased The 1 CUP button will illuminate. from the Sage website or by contacting Sage Customer Service. 8. Press the 1 CUP button to start the cleaning cycle.
Page 19
DESCALING 6. Remove and empty the drip tray then replace onto the machine. Empty any remaining descaling liquid from the water tank, then fill NOTE the water tank to the MAX line and reattached to the machine. Ensure that the water filter is removed from the 7.
Page 20
CLEANING THE CONICAL BURR GRINDER This grinder cleaning cycle removes oil build-up on the burrs which can impede performance. Run grinder Unlock hopper Empty hopper Replace hopper Lock hopper Unlock hopper Remove hopper empty Clean top burr Clean lower Clean chute Unlock top burr Remove top burr with brush...
Page 21
If your machine displays on the LCD, contact Press the 1 CUP button and run a short flow of Sage Customer Service. water to rinse out any residual coffee. Press the 1 CUP button again to stop the hot water.
Dosing Funnel ™ Troubleshooting PROBLEM POSSIBLE CAUSES WHAT TO DO • Water tank is empty. • Fill tank. Water does not flow from the group head. • Water tank is not fully inserted • Push water tank down completely No hot water. and locked into position.
Page 23
PROBLEM POSSIBLE CAUSES WHAT TO DO • Coffee is ground too coarsely. • Use slightly finer grind. Espresso runs out too quickly. Refer to ‘Setting the Grind Size’, page 12 and ‘Under Extraction’, page 14. • Not enough coffee in the filter •...
Page 24
• Press the POWER button to switch Machine is on but ceases to operate. have activated due to the pump the machine off and unplug from or grinder overheating. the power outlet. Allow to cool for about 30–60 minutes. • If problem persists, call Sage Support.
Page 25
PROBLEM POSSIBLE CAUSES WHAT TO DO • No coffee beans in hopper. • Filler hopper with fresh coffee No ground coffee coming from grinder. beans. • Blocked grinder chamber or • Clean and clear grinder chamber chute. and chute. Refer to ‘Advanced Cleaning for the Conical Burr Grinder’, page 20.
During this guarantee period Sage Appliances will repair, replace, or refund any defective product (at the sole discretion of Sage Appliances). All legal warranty rights under applicable national legislation will be respected and will not be impaired by our guarantee.
Page 28
Deutschland: 0800 505 3104 Österreich: 0800 80 2551 Portugal Sweden 0800 180 243 0200 123 797 Sage Appliances France SAS Siège social: 66 avenue des Champs Elysées – 75008 Paris Poland Finland 879 449 866 RCS Paris 00800 121 8713...