Honeywell PX4i User Manual page 133

Copy Length (b)
Measurement
Minimum without LTS
Minimum with LTS
Maximum
Note: Under ideal circumstances, a minimum ticket length of 4 mm (0.16 in) could be used.
It requires the sum of the copy length (b) and the detection slit height (e) to be larger
than 7 mm (0.28 in), that batch printing is used, and that no pull back of the media is
performed. Honeywell does not guarantee that such short tickets will work, but it is
up to users to test this in their unique application
LSS Detection Position (c)
This position is variable. For help, see "Adjusting the Label Stop Sensor" on
page 97.
Detection Slit Length (d)
The length of the detection slit (excluding corner radii) must be a minimum of 2.5
mm (0.10 in) on either side of the LSS detection position (c).
Detection Slit Height (e)
Measurement
Maximum
Recommended
Minimum
Media Type
Set media type to one of these values:
•
•
Note: Do not allow a perforation to break the edge of the media, because the media may
split and jam the printer.
PX4i and PX6i High Performance Printer User Guide
Value
8 mm (0.32 in)
12 mm (0.47 in)
6,143 mm (241 in) Depends on SDRAM size.
Value
25.0 mm (0.98 in)
1.6 mm (0.06 in)
1.2 mm (0.05 in)
Fingerprint: GAP STOCK
IPL: GAP
121