Usb Host Interface; Ethernet Interface - Honeywell PX4i User Manual

The USB cable that ships with the printer has a USB Type A connector on one end
to connect to the PC and a USB Type B connector on the other end to connect to
the printer. You do not need to configure communications for the USB port.
USB Type A Connector
USB Type B Connector

USB Host Interface

The printer has a USB host interface for connecting USB devices such as HID bar
code scanners and keyboards, USB storage devices, and USB hubs.
USB Host Interface
Pin
1
2
3
4

Ethernet Interface

The Ethernet interface has an RJ-45 socket for use with a standard RJ-45 cable.
The interface supports 10/100 Mbps Fast Ethernet (10BASE-T, 100BASE-TX) and
is fully compliant with the IEEE 802.3u standard. The network card MAC address
can be found on the label below the socket.
Ethernet Socket
Ethernet Connector
114
1 2 3 4
Description
VBUS
D-
D+
Gnd
PX4i and PX6i High Performance Printer User Guide