Interfaces - Honeywell PX4i User Manual

•
Printing Speed and Resolution
Specification
Print Mode
Print Speed (variable)
Printhead Resolution
Print Width (maximum)
Transfer
Print Length (maximum)
Media Width
Media Roll Diameter
(maximum)
Media Roll Core Diameter
Ribbon Width
Ribbon Roll Outer
Diameter (maximum)
Ribbon Roll Core Inner
Diameter
Print Directions

Interfaces

This section describes the standard interfaces available on the PX4i and PX6i
printers.
112
USB memory device (optional)
PX4i Direct Transfer
PX4i Thermal
PX6i
Fingerprint
IPL
PX4i
PX6i
PX4i
PX6i
Description
Direct
Thermal Transfer
100 to 300 mm/sec (4 to 12 in/sec)
8 dots/mm (203.2 dpi)
11.81 dots/mm (300 dpi)
16 dots/mm (406 dpi) (PX4i only)
112 mm (4.41 in)
114 mm (4.5 in)
167.4 mm (6.59 in)
32767 dots
= 409.5 cm (161.25 in) at 203.2 dpi
= 277.5 cm (109.23 in) at 300 dpi
= 409.5 cm (161.25 in) at 203 dpi
Note: The maximum print length is also restricted by the
amount of free SDRAM memory.
25 to 120 mm (1 to 4.72 in)
76.2 to 170 mm (3 to 6.69 in)
213 mm (8.38 in) Tear-Off
205 mm (8.07 in Peel-Off
38 to 40 mm (1.5 in)
76 mm (3 in) with adapter fitted
55 to 114 mm (2.17 to 4.5 in)
76.2 to 168 mm (3 to 6.61 in)
80 mm (3.15 in)
± 450 m (1476 ft) of ribbon
25 mm (1 in)
4
PX4i and PX6i High Performance Printer User Guide