Appendix B - Default Settings; Default Configuration; Fingerprint Default Configuration - Honeywell PX4i User Manual

APPENDIX
B
DEFAULT SETTINGS

Default Configuration

The following tables list the default values of the configuration commands sup-
ported on the printer. If you restore the printer to factory default settings, the
printer uses these values.
The commands are grouped by function and reflect the organization of the IPL and
Fingerprint setup menus. For detailed information on most of the commands, see
the Fingerprint Command Reference Manual or the IPL Command Reference Man-
ual.

Fingerprint Default Configuration

Ser-Com "uart1:" Parameters
Parameter
Baud rate
Character length
Parity
Stop bits
Flow control
New line
Receive buffer
Transmit butter
PX4i and PX6i High Performance Printer User Guide
RTS/CTS
ENQ/ACK
XON/XOFF; data to host
XON/XOFF; data from host
Default Value
9600
8
None
1
Disable
Disable
Disable
Disable
CR/LF
1024 bytes
1024 bytes
127