Status
Class
message in
the display
Pressure too
Overrange
high
Pos: 70 /TD/Überschriften/MUF/1.6 Wartung und Reinigung @ 3\mod_1234443039129_79.doc @ 24982 @ 2
4.6.
Maintenance and cleaning
Pos: 71 /TD/Produkt instand halten/MUF 63xx/Gerät warten/reinigen 635x @ 4\mod_1245756987352_79.doc @ 45305 @ 33
4.6.1.
Maintaining the instrument
We recommend that the adjustment and settings of the transmitter
be checked at regular intervals using the
•
User menu (Operation, page 32) or
•
P2A software (Parameterizing, adjusting and analyzing software
(P2A software), page 53)
Convenient "remote monitoring" of the transmitter can be
implemented, for example by using a relay as a collective alarm
(see Editing Main Menu Alarm, page 39) whose messages are
forwarded to a local alarm transmitter (horn, light) or PLC.
4.6.2.
Cleaning the instrument
•
Only clean the instrument carefully with a moist cloth.
•
Do not use aggressive cleaning agents.
•
Do not use any solvents.
Pos: 72 /TD/Überschriften/MUF/3 Parametrier-, Abgleich und Analysesoftware (P2A-Software) @ 3\mod_1234258523713_79.doc @ 23932 @ 1
5
Parameterizing, adjusting and analyzing
software (P2A software)
Pos: 73 /TD/Überschriften/MUF/1.1/2.1/3.1 Leistungsbeschreibung @ 3\mod_1234258595211_79.doc @ 23951 @ 2
5.1.
Specifications
Pos: 74 /TD/Leistungsbeschreibung/Verwendung/MUF63xx/MUF 63xx P2A @ 3\mod_1234258967326_79.doc @ 24065 @ 355
The P2A software is used for the parameterizing, adjustment and
analysis of testo transmitters. The following applies:
•
Generally, all newer testo transmitters (as of 2007) are
supported.
•
Included with every testo transmitter that is bought new is a CD
that contains a free upgrade of the software, which includes the
device drivers for all transmitters that can be attached at this
time.
5 Parameterizing, adjusting and analyzing software (P2A software)
Display
Analog output
value in the
display
ooooo ·
20.5 mA 20.5 mA 1.1 V 5.5 V 11 V
53