Moisture Plus Function; Set The Temperature; Set The Number Of Bursts Of Steam - Miele H6860BPXB Operating And Installation Instructions

One burst of steam takes approx. 5–
8 minutes. The number of bursts of
steam and when they are injected will
depend on the type of food being
cooked:
– Yeast mixtures will rise better if
steam is injected at the beginning of
the programme.
– Bread and rolls also rise better if
exposed to steam at the start.
Injecting a burst of steam at the end
of the programme will give the bread
and rolls a glistening crust.
– When roasting meat with a high fat
content injecting steam at the
beginning of roasting will help render
the fat.
Additional moisture is not suitable for
mixtures which already contain a lot of
moisture, such as choux pastry and
meringues, as the addition of steam
does not allow them to dry out
sufficiently.
Tip: See the recipe book for more
information.
Moisture plus 
Moisture plus function 
It is quite normal for condensation to
form on the inside of the door during
steam injection. This will dissipate
during the course of the cooking
programme.
 Prepare the food and place in the
oven.
 Select
Oven functions
 Select the Moisture plus  function.
The recommended temperature of
160 °C will appear.
The oven heating, lighting and cooling
fan will switch on.

Set the temperature

 Set the required temperature.
 Confirm with OK.

Set the number of bursts of steam

 If you would like a burst of steam to
be automatically injected into the
oven after the heating-up phase,
select
Automatic burst of steam
 If you would like to inject one or more
bursts of steam manually at specific
times, select 1 burst of steam
or
of steam 3 bursts of steam
.
.
, 2 bursts
.
65