Switching On And Off Automatically; Sequence Of A Programme That Switches On And Off Automatically - Miele H6860BPXB Operating And Installation Instructions

Advanced operation

Switching on and off automatically

We recommend using automatic
switching on and off when roasting.
For baking do not delay the start for
too long as the cake mixture or dough
will dry out, and the raising agents will
lose their effectiveness.
To switch a cooking programme on and
off automatically you have a choice of
how to enter the time parameters:
– Duration and Ready at
– Duration and Start at
– and
Ready at Start at
Example: it is 11:30. The food takes 30
minutes to cook and should be ready at
12:30.
 Select
.
Change
 Select
Open further settings
 Set a duration of 0:30 h in the
field.
 Set a time of 12:30 in the
field.
 Confirm with OK.
The Start at time will be calculated
automatically. Start at 12:00
in the display.
The oven will switch on automatically
when this time is reached.
62
Sequence of a programme that
switches on and off automatically
Up until the start time the function, the
selected temperature,
start time will appear in the display.
After the programme has started you
can follow the heating-up phase in the
display until the required temperature
has been reached.
Once this temperature is reached a
buzzer will sound, if this option has
been switched on (see "Settings -
Volume - Buzzer tones").
After the heating-up phase the time
remaining will appear in the display.
You can follow the time counting down
in the display. The last minute counts
down in seconds.
At the end of the programme a buzzer
.
will sound, if this option has been
switched on (see "Settings - Volume -
Duration
Buzzer tones").
The oven heating and lighting will
Ready at
switch off.
the display.
You have the option of saving the
programme as a User programme (see
will appear
"User programmes") or increasing the
duration of the programme via
During the cooling down phase the
cooling fan will continue to run for a
while.
Start at
Process finished will appear in
and the
.
Change