S
W
ETUP FOR
INDOWS
STEP 1: T
URN ON THE
Press and hold the small power button until the LED turns blue and the scanner beeps twice (low-high).
The LED should blink blue once per second to show that the Bluetooth radio is on but not connected.
Time after turning on scanner Bluetooth mode
0-5 minutes
2 hours
STEP 2: S
B
TART
LUETOOTH ON
Note: Refer to your Bluetooth hardware/software documentation for full instructions.
1. If using an add-on Bluetooth card or adapter, such as the Socket Scanning Companion USB adapter, plug it in
your computer.
2. Start your computer's Bluetooth software. For some computers, the Bluetooth software will automatically
launch after turning on the Bluetooth radio.
3. Turn on the Bluetooth radio. For some computers, the Bluetooth radio must be enabled through the software.
Other computers have a hardware switch.
Note: Your Bluetooth software may vary from the screen shown.
7, V
,
ISTA
AND
B
CHS
LUETOOTH
Discoverable and connectable
If trigger button is not pressed,
scanner automatically powers off
Y
C
OUR
OMPUTER
XP