Caution When Formatting "Memory Stick" On A Personal Computer; When The Status Indicator Is Lit Or Flashing; Precautions; Specifications - Sony MKS-8010A Operation Manual

format "Memory Stick," we recommend formatting them
on this product.
Caution When Formatting "Memory
Stick" on a Personal Computer
Pay attention on the following points when formatting
"Memory Stick" on a personal computer. Operation of
"Memory Stick" formatted on a personal computer is not
guaranteed on this product. To use a "Memory Stick" that
has been formatted on a personal computer, the "Memory
Stick" must be reformatted on this product. If it is not
reformatted, all data stored on the "Memory Stick" will be
lost.
For information about how to format "Memory Sticks,"
refer to "Formatting memory cards" in "Device
maintenance (Maintenance menu)" of "Chapter 16
Engineering Setup" in Volume 2 of the Users's Guide for
an MVS-8000 system (for CCP-8000) or a DVS-9000
system (for CCP-8000). (Read "Memory Sticks" wherever
the manual refers to "memory cards.")
When the Status Indicator Is Lit or
Flashing
This indicates that data is being read or written. Do not
subject the unit to vibrations or strong shocks at this time.
Also, do not power the unit off or remove a "Memory
Stick" when the indicator is lit or flashing. Doing so can
lead to the loss of data.

Precautions

• To prevent data loss, make backups of data frequently. In
no event will Sony be liable for any loss of data.
• Unauthorized recording may be contrary to the
provisions of copyright law.
• The "Memory Stick" application software may be
modified or changed by Sony without prior notice.
• "Memory Stick Duo" and
trademarks of Sony Corporation.
• "Memory Stick" and
Corporation.
• "MagicGate Memory Stick" and
are the trademarks of Sony Corporation.
• "Memory Stick-ROM" and
trademarks of Sony Corporation.
• "Memory Stick PRO" and
trademarks of Sony Corporation.
• "Memory Stick R" and
trademarks of Sony Corporation.
22

Specifications

are the
are the trademarks of Sony
are the
are the
are the
Specifications
The following specifications show the reference
performance for this unit and individual option boards/
modules.
Design and specifications are subject to change without
notice.

Center Control Panel

The center control panel is comprised of the main panel,
the System Control Unit (MKS-8010A), the menu panel
(MKS-8011A), and operation modules. The required
operation modules are installed in the main panel at the
factory.
The following accessories are center control panel
accessories.
Accessories supplied
75Ω terminator (1)
T bridge (1)
Button top puller (1)
50-pin cables*
Name plates**
USB cable (5 m/16 ft) (1)
Track ball (1)
Switch cover 12 (20)
Switch cover 15 (20)
Self-lighting switch chip (1)
Hexagonal wrench (1)
Operation Manual (1)
Installation Manual (1)
User's Guide (2)
Software License Agreement (1)
∗ The number depends on the system configuration.
∗∗ The number and type depend on the system configuration.
When purchased together with the center control panel,
the MKS-8075A Extension Adaptor and MKS-8076
Memory Card/USB Adaptor are supplied with the same
accessories as when purchased separately (see page 28).

Main Panel

Main panel specifications vary according to the system
configuration. The following shows specifications for
typical configurations.
General
Power requirements
12 V DC