Table of Contents
Advertisement
Headlight Beam Changer
With the headlights on, pull the lever toward you until you hear a click,
then release it.
The lights will change from low-beam to high beam, or
from high-beam to low-beam.
When the high-beams are on,
a
lg
1
w
appear on the instrument panel.
HEADLIGHT BEAM CHANGER
(HEADLIGHTS ON)
PULL LEVER TOWARD YOU
Delay Windshield Wiper
The delay windshield wiper system lets you vary the wiper sPfed fr™ "
second delay between sweeps up to the normal low speed of the standard
wiper.
For a single wiping cycle turn the band toward you.
wipers begin wiping, then release it.
The wipers will stop after one eye
.
For several cycles hold the band in place as long as needed.
For steady wiping at low speed turn the band away from you to the finst
stop
For high-speed wiping turn the band to the next stop.
Turn the band
back to "OFF" to turn off the wipers.
Tn use the wipers with a delay between sweeps, turn the band on the turn
qiP-nal lever toP "ON"
Turn the "Delay" band away from you to control the
amount of delay.
The wipers will
move
more often thetow speed '
to "LO".
Turn it fully to the first stop for a steady wiping at low sp
Windshield Washer
To spray washer fluid on the windshield, push the "paddle" on top of the
turn signal lever.
(This will also turn on the low speed wipers.)
The sp
y
will continue as long as you hold in the paddle.
With the Delay wiper system, the wipers will stop (for return to the action
for which they were set) after completing the wash cycle.
C-25
Advertisement
Table of Contents
