Table of Contents
Advertisement
PROBLEM:
CAUSE/
REMEDY:
PROBLEM:
CAUSE/
REMEDY:
PROBLEM:
CAUSE/
REMEDY:
supply line to saddle valve.
Depress valve handle.
If water
flows,
obstruction
has
been
removed.
If
no
water flows,
replace complete assembly.
Water is cold.
Plug not installed in outlet.
Install plug in outlet.
Circuit
breaker
open
or
fuse
not
installed.
Close
circuit
breaker or install fuse.
Wire
loose
and/or
disconnected
at
thermostat
or
heating
element.
Reconnect wire.
Thermostat not adjusted properly.
Adjust thermostat.
Thermostat defective.
Replace thermostat.
Thermal fuse open.
Replace thermal fuse.
Open heating element.
Replace complete assembly.
Water not hot enough.
Thermostat not set high enough.
Turn thermostat adjusting
screw clockwise to increase operating temperature.
Thermostat defective.
Replace thermostat.
Tank hot water supply exhausted.
Allow tank to recover to
full operating temperature.
Unit spits when drawing first cup of water.
No aspirator ball.
Install aspirator ball.
Aspirator ball stuck in tube.
Dislodge and replace ball.
Thermostat set too high.
Water boils.
Adjust thermostat.
Thermostat set too
high.
Will not
respond
to
adjustment.
Replace thermostat.
No
water
in
expansion
chamber.
Continued
use
will
fill
expansion chamber.
Air in water supply line.
Correct household water supply.
G-23
Advertisement
Table of Contents
