Table of Contents
Advertisement
gate valve removal and replacement
1.
Make sure both tanks are empty.
2.
Drill out rivet attaching extension handle to shaft.
3.
Remove four bolts holding slide mechanism to adapters.
4.
Pry adapters away from slide and pull seal clear.
5.
Slide mechanism will now be free to come out from between adapters.
Most repairs will only require replacement of seals,
and flashlight to make sure they are properly positioned
bolts can save time in the long run.
Using a small mirror
before installing the
1.
Mounting Bolts
2.
Adapters, Line to
Slide
3.
Seals
4.
Slide Mechanism
G-37
Advertisement
Table of Contents
