Table of Contents
Advertisement
6.3
Setting options per channel
General settings and special parameter settings must be made for each channel.
The settings are made via the allocation function of the Web-based user
interface of the System Access Point.
Select device
Fig. 16:
Select device
1. Select the device icon [1] in the floor plan of the working area view.
All setting options for the respective channel are displayed in the list view [2]. For rockers
(sensors) the corresponding rocker must be selected.
The following settings are available.
Technical Reference Manual 2CKA001473B9194
Commissioning
│26
Advertisement
Table of Contents
