Table of Contents
Advertisement
3
Setup and function
Fig. 1:
Product overview
[1] Flush-mounted insert
[2] Cover frame (not included in scope of delivery)
[3] Cover
This device is a movement detector/switch actuator unit for decentralized flush-mounted
installation. The movement detector and the switch actuator form a single unit. The devices
respond to moving body heat and switch on the lights. They are appropriately pre-programmed
and switch directly after being installed. However, this pre-configuration can be adjusted as
required.
The devices do not serve as a substitute for an alarm system.
Sensor and actuator are combined in a flush-mounted insert [1].
After connecting the load, it can be switched directly.
Technical Reference Manual 2CKA001473B9194
1
2
Setup and function
3
│8
Advertisement
Table of Contents
