Table of Contents
Advertisement
6.4.2
Linking an actuator with an additional sensor
Fig. 21:
Linking an actuator with an additional sensor
1. On the working area select the second sensor [1] that is to be linked with the actuator.
2. Select the actuator [2] that is to be served by the sensor.
3. Press the arrow at the bottom right to take over the entries.
An additional blue connecting line indicates the link between the two devices. After the
transmission of the configuration the sensor can be operated directly locally.
Technical Reference Manual 2CKA001473B9194
Commissioning
│30
Advertisement
Table of Contents
