Table of Contents
Advertisement
6.3.1.1
Parameter settings of movement detectors/switch actuators, 1gang
Actuator settings
Fig. 17:
Actuator settings
Sensor settings (movement detector)
Fig. 18:
Sensor settings - Movement detector
6.3.1.2
Parameter settings of movement detector (sensor)
Sensor settings (movement detector)
Fig. 19:
Sensor settings - Movement detector
Technical Reference Manual 2CKA001473B9194
[1] Changing the name
[2] Deleting the channel
[3] Switching of the actuator via the button
[4] Selection of a different icon
[5] Setting the switch-off delay in seconds
– The -/+ buttons can be used to specify, for
example, how long the light remains switched
on after the actuator has deactivated the load.
[6] Behaviour during faults
– Display of information only. No settings are
possible.
[1] Changing the name
[2] Deleting the channel
[3] Switching of the actuator via the button
[4] Selection of the brightness conditions at which the
device is to respond. Activation:
independent of the brightness
■
during twilight
■
during darkness
■
[1] Changing the name
[2] Deleting the channel
[3] Switching of the actuator via the button
[4] Selection of the brightness conditions at which the
device is to respond. Activation:
independent of the brightness
■
during twilight
■
during darkness
■
Commissioning
│27
Advertisement
Table of Contents
