Table of Contents
Advertisement
7
Update
A firmware update is carried out via the Web-based user interface of the System Access Point.
8
Operation
The devices respond to moving body heat and switch on the lights. They have been pre-
programmed accordingly.
Action by the user is not necessary.
9
Maintenance
The device is maintenance-free. In case of damage, e.g. during transport or storage), do not
perform repairs. Once the device is opened, the warranty is void.
Access to the device must be guaranteed for operation, testing, inspection, maintenance and
repairs (according to DIN VDE 0100-520).
9.1
Cleaning
Caution! - Risk of damaging the device!
■
■
Clean dirty devices with a soft dry cloth.
–
If this is insufficient, the cloth can be moistened slightly with a soap solution.
Technical Reference Manual 2CKA001473B9194
When spraying on cleaning agents, these can enter the device through
crevices.
–
Do not spray cleaning agents directly onto the device.
Aggressive cleaning agents can damage the surface of the device.
–
Never use caustic agents, abrasive agents or solvents.
Update
│31
Advertisement
Table of Contents
