IEI Technology IKARPC-07A-BT User Manual
  1. Manuals
  2. Brands
  3. IEI Technology Manuals
  4. Touch Panel
  5. IKARPC-07A-BT
  6. User manual

IEI Technology IKARPC-07A-BT User Manual

7” in-vehicle panel pc with touchscreen, intel atom? processor e3826, obd-ii, gps, usb 2.0/3.0, hdmi, rs-232/422/485, rohs compliant, ip 54 front panel
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IKARPC-07A-BT In-vehicle Panel PC
MODEL:
IKARPC-07A-BT
7" In-Vehicle Panel PC with Touchscreen,
Intel® Atom™ Processor E3826, OBD-II, GPS, USB 2.0/3.0,
HDMI, RS-232/422/485, RoHS Compliant, IP 54 Front Panel
User Manual
Page I
Rev. 1.10 – August 11, 2016

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IKARPC-07A-BT and is the answer not in the manual?

Questions and answers

Related Manuals for IEI Technology IKARPC-07A-BT

Summary of Contents for IEI Technology IKARPC-07A-BT

  • Page 1 IKARPC-07A-BT In-vehicle Panel PC MODEL: IKARPC-07A-BT 7” In-Vehicle Panel PC with Touchscreen, Intel® Atom™ Processor E3826, OBD-II, GPS, USB 2.0/3.0, HDMI, RS-232/422/485, RoHS Compliant, IP 54 Front Panel User Manual Page I Rev. 1.10 – August 11, 2016...
  • Page 2 IKARPC-07A-BT In-vehicle Panel PC Revision Date Version Changes August 11, 2016 1.10 Updated Section 1.3: Front Panel Updated Section 4.2: Mobile AP November 27, 2015 1.01 Updated Table 6-1: Peripheral Interface Connectors June 18, 2015 1.00 Initial release Page II...
  • Page 3 IKARPC-07A-BT In-vehicle Panel PC Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
  • Page 4 IKARPC-07A-BT In-vehicle Panel PC Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product.

  • Page 5: Table Of Contents

    IKARPC-07A-BT In-vehicle Panel PC Table of Contents 1 INTRODUCTION......................1 1.1 O ........................2 VERVIEW 1.2 F ........................2 EATURES 1.3 F ......................3 RONT ANEL 1.3.1 LED Indicators....................4 1.4 R ....................... 5 ANEL 1.5 B ......................6 OTTOM ANEL 1.6 S...
  • Page 6 IKARPC-07A-BT In-vehicle Panel PC 4 SOFTWARE DRIVERS ....................28 4.1 D ........................29 RIVERS 4.2 M AP ......................30 OBILE 4.2.1 Installation ....................... 30 4.2.2 Usage ....................... 31 5 BIOS ..........................33 5.1 I ......................34 NTRODUCTION 5.1.1 Starting Setup....................34 5.1.2 Using Setup ......................
  • Page 7 IKARPC-07A-BT In-vehicle Panel PC 6.2.1 Battery Connector (BT1).................. 65 6.2.2 Camera Connector (WEB1)................65 6.2.3 Clear CMOS Connector (C_CMOS1) ............. 65 6.2.4 LED Connector (JLED1) ................. 65 6.2.5 LVDS Connector (LVDS1) ................66 6.2.6 Microphone Connector (JMIC1) ..............67 6.2.7 mSATA Module Socket (SATA1) ............... 67 6.2.8 PCIe Mini Socket for 3.75G Module (MINI_PCIE1) ........
  • Page 8 IKARPC-07A-BT In-vehicle Panel PC List of Figures Figure 1-1: IKARPC-07A-BT Panel PC ..................2 Figure 1-2: Front View ........................3 Figure 1-3: LED Indicators......................4 Figure 1-4: Rear Panel........................5 Figure 1-5: Bottom View ........................6 Figure 1-6: Side Panels ........................6 Figure 1-7: Top Panel ........................7 Figure 1-8: Dimensions (unit: mm) ....................7...
  • Page 9 IKARPC-07A-BT In-vehicle Panel PC List of Tables Table 1-1: LED Indicators ......................4 Table 1-2: Technical Specifications....................9 Table 2-1: Packing List.........................12 Table 2-2: Optional Items......................14 Table 3-1: IO 1 Connector Pinouts....................21 Table 3-2: IO 2 Connector Pinouts....................22 Table 3-3: HDMI Connector Pinouts ...................23 Table 3-4: Power Input Connector Pinouts................24...

  • Page 11: Introduction

    IKARPC-07A-BT In-vehicle Panel PC Chapter Introduction Page 1...

  • Page 12: Overview

    1.1 Overview Figure 1-1: IKARPC-07A-BT Panel PC The IKARPC-07A-BT is a 7” panel PC designed for in-car use. At the heart of the system is the Intel® Atom™ processor E3826, offering low power in a powerful package. The system also offers a multimedia experience with a built-in 2-megapixel camera, HDMI port and speaker.

  • Page 13: Front Panel

    IP 54 compliant front panel   RoHS compliance 1.3 Front Panel The front of the IKARPC-07A-BT is a flat panel screen with a plastic frame. The components on the front panel are listed below:  2-megapixel camera  Ambient light sensor ...

  • Page 14: Led Indicators

    IKARPC-07A-BT In-vehicle Panel PC 1.3.1 LED Indicators The LED indicators on the front panel show the status of power, Wi-Fi and 3.75G connection. Figure 1-3: LED Indicators The system is off with power connected Blue The system is turned on...

  • Page 15: Rear Panel

    IKARPC-07A-BT In-vehicle Panel PC 1.4 Rear Panel The rear panel has VESA mounting screw holes and an access panel for microSD card and SIM card. The following I/O connectors can also be found on the rear panel.  1 x 9 V~ 30 V DC input connector ...

  • Page 16: Bottom Panel

    IKARPC-07A-BT In-vehicle Panel PC 1.5 Bottom Panel The bottom panel has a 2 W speaker. Figure 1-5: Bottom View 1.6 Side Panels The right side panel has one USB 3.0 port and the left side panel has one USB 2.0 port.

  • Page 17: Top Panel

    IKARPC-07A-BT In-vehicle Panel PC 1.7 Top Panel The top panel has a power button. Press the power button for 4~6 seconds to power on the system. Figure 1-7: Top Panel 1.8 Dimensions The dimensions are shown below. Figure 1-8: Dimensions (unit: mm)

  • Page 18: System Specifications

    IKARPC-07A-BT In-vehicle Panel PC 1.9 System Specifications The technical specifications for the IKARPC-07A-BT systems are listed in Table 1-2. System Intel® Atom™ processor E3826 (dual-core, 1.46 GHz, 7W TDP) Memory On-board 2 GB SDRAM Storage One microSD card slot (SD 2.0 compatible, max. 32 GB)

  • Page 19: Table 1-2: Technical Specifications

    IKARPC-07A-BT In-vehicle Panel PC Power Consumption 12 V @ 1.25 A Physical Character Construction Material ABS + PC plastic Mounting VESA 75 mm x 75 mm Dimensions (W x H x D) 210 mm x 154 mm x 29 mm Operation Temperature -20°C ~ 60°C with air flow...

  • Page 20: Unpacking

    IKARPC-07A-BT In-vehicle Panel PC Chapter Unpacking Page 10...

  • Page 21: Packing List

    If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the IKARPC-07A-BT was purchased from or contact an IEI sales representative directly by sending an email to ales@ieiworld.com.

  • Page 22: Optional Items

    IKARPC-07A-BT In-vehicle Panel PC Quantity Item Image IKARPC-07A-BT in-vehicle panel PC ACC power cable (P/N: 32002-001900-100-RS) GPS/GSM antenna (P/N: 32506-000100-100-RS) User manual CD and driver CD Table 2-1: Packing List 2.2 Optional Items The following are optional components which may be separately purchased:...
  • Page 23 IKARPC-07A-BT In-vehicle Panel PC Item Image WWAN kit (assemble-to-order) (P/N: IKARPC-3G-KIT01-R10) Power adapter with transfer cable (P/N: IVIPOWER-4PIN-R10) Cigarette lighter power cable (P/N: 32002-004000-100-RS) I/O connector 1 cable (20-pin) (P/N: 32024-003000-100-RS) I/O connector 2 cable (24-pin) (P/N: 32124-003700-100-RS) OBD-II cable...

  • Page 24: Table 2-2: Optional Items

    IKARPC-07A-BT In-vehicle Panel PC Item Image VESA mount stand (138 mm) (P/N: IVI-MK03-R10) Windows Embedded 7 CD (P/N: IKARPC-07A-BT-WES7P-R10) Windows Embedded 8 CD (P/N: IKARPC-W10A-WE8S-R10) Table 2-2: Optional Items If any of these items are missing or damaged, contact the distributor or sales representative immediately.

  • Page 25: Installation

    IKARPC-07A-BT In-vehicle Panel PC Chapter Installation Page 15...

  • Page 26: Anti-Static Precautions

    IKARPC-07A-BT and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IKARPC-07A-BT. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the IKARPC-07A-BT is accessed internally, or any other electrical component is handled, the following anti-static precautions are strictly adhered ...

  • Page 27: Microsd Card Installation

    IKARPC-07A-BT In-vehicle Panel PC  Anti-static Discharge: If a user open the rear panel of the flat panel PC, to configure the jumpers or plug in added peripheral devices, ground themselves first and wear an anti-static wristband. 3.3 microSD Card Installation To install the microSD card, follow the instructions below.

  • Page 28: Sim Card Installation (Optional)

    Step 1: Figure 3-3: SIM Card Slot Access Panel Retention Screw Locate the SIM card slots. The IKARPC-07A-BT has two SIM card slots (Figure Step 2: 3-4). Insert a SIM card into the slot to install it. To remove the SIM card, push the SIM card to release it.
  • Page 29 IKARPC-07A-BT In-vehicle Panel PC WARNING: The IKARPC-07A-BT is not compatible with a micro-SIM (3FF) adapter or a nano-SIM (4FF) adapter. Please install a mini-SIM (2FF or Standard SIM) card for proper network connection. Replace and secure the SIM card slot access panel with the previously removed Step 3: retention screw.

  • Page 30: Mounting The System

    The IKARPC-07A-BT is VESA (Video Electronics Standards Association) compliant and can be mounted on a mounting device with a 75 mm interface pad. The IKARPC-07A-BT VESA mount retention screw holes are shown in Figure 3-5. Refer to the installation guide that came with the mounting device to mount the IKARPC-07A-BT.

  • Page 31: External I/O Connectors

    IKARPC-07A-BT In-vehicle Panel PC 3.6 External I/O Connectors This section provides an overview of the external I/O connectors of the IKARPC-07A-BT. 3.6.1 I/O Connector 1 (20-pin) The 20-pin I/O connector (IO 1) supports the following external peripheral devices:  1 x GbE LAN 1 x OBD-II/CAN bus ...

  • Page 32: I/O Connector 2 (24-Pin)

    IKARPC-07A-BT In-vehicle Panel PC 3.6.2 I/O Connector 2 (24-pin) The 24-pin I/O connector (IO 2) supports the following external peripheral devices:  1 x Audio line-out (R+L)  1 x Audio line-in  1 x RS-232  2-bit digital input ...

  • Page 33: Hdmi Connector

    Please refer to Section 5.4.2 for detail information. 3.6.3 HDMI Connector The IKARPC-07A-BT has one HDMI connector on the rear panel. The pinouts for the HDMI connector are listed in the figure and table below. Figure 3-8: HDMI Connector PIN NO.

  • Page 34: Power Input Connection

    DESCRIPTION POWER Table 3-4: Power Input Connector Pinouts The IKARPC-07A-BT can use either ACC power or DC power from the vehicle. To use ACC power, connect the IKARPC-07A-BT to the vehicle through the ACC power cable. See Figure 3-10. Figure 3-10: ACC Power Cable...

  • Page 35: Usb Connector

    Figure 3-11: Optional Cigarette Lighter Cable 3.6.5 USB Connector The IKARPC-07A-BT has one USB 2.0 port on the left side panel and one USB 3.0 port on the right side panel. The USB 3.0 port has a screw on the side for securing the USB devices, such as barcode scanners and smart card readers.

  • Page 36: Power-On Procedure

    To power-on the IKARPC-07A-BT, connect either the ACC power cable or the optional cigarette lighter power cable from the IKARPC-07A-BT to the vehicle. The IKARPC-07A-BT will automatically turn on once the power is connected.

  • Page 37: System Maintenance

    IKARPC-07A-BT In-vehicle Panel PC 3.8 System Maintenance If the components of the IKARPC-07A-BT fail, they must be replaced. Please contact the system reseller or vendor to purchase the replacement parts. NOTE: A user cannot replace a motherboard. If the motherboard fails it must be shipped back to IEI to be replaced.

  • Page 38: Software Drivers

    IKARPC-07A-BT In-vehicle Panel PC Chapter Software Drivers Page 28...

  • Page 39: Drivers

    IKARPC-07A-BT In-vehicle Panel PC NOTE: The content of the CD may vary throughout the life cycle of the product and is subject to change without prior notice. Visit the IEI website or contact technical support for the latest updates. 4.1 Drivers The utility CD contains drivers for Windows 7 and Windows 8 operating systems.

  • Page 40: Mobile Ap

     I/O driver 4.2 Mobile AP IEI provides an application tool, Mobile AP, for the users of the IKARPC-07A-BT with the WWAN module installed to manage mobile network and make a phone call. 4.2.1 Installation To install this application tool, please locate the WLAN folder in the utility CD. This folder contains two files for different operating systems.

  • Page 41: Usage

    IKARPC-07A-BT In-vehicle Panel PC 4.2.2 Usage To launch the application, double click the MobileAP icon on the Windows desktop. The user interface appears as shown in Figure 4-1. The functions are described below. Figure 4-1: Mobile AP–Connection  Sim card switch: Select a SIM card to designate a SIM card to use or click the Refresh SIM status button to let the system detect automatically.

  • Page 42: Figure 4-2: Mobile Ap-Dial Up

    IKARPC-07A-BT In-vehicle Panel PC The Mobile AP also allows the user to make a phone call. To use Mobile AP to make a phone call, click the Dial up tab in the Mobile AP. Then, the user interface appears as shown in Figure 4-2.

  • Page 43: Bios

    IKARPC-07A-BT In-vehicle Panel PC Chapter BIOS Page 33...

  • Page 44: Introduction

    IKARPC-07A-BT In-vehicle Panel PC 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. NOTE: Some of the BIOS options may vary throughout the life cycle of the product and are subject to change without prior notice.

  • Page 45: Getting Help

    IKARPC-07A-BT In-vehicle Panel PC Function Increase the numeric value or make changes Decrease the numeric value or make changes Page Up key Move to the previous page Page Dn key Move to the next page Esc key Main Menu – Quit and not save changes into CMOS...

  • Page 46: Main

    IKARPC-07A-BT In-vehicle Panel PC The following sections completely describe the configuration options found in the menu items at the top of the BIOS screen and listed above. 5.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered.
  • Page 47 IKARPC-07A-BT In-vehicle Panel PC  Build Date: Date the current BIOS version was made  CPU Information The CPU Information lists a brief summary of the CPU. The fields in CPU Information cannot be changed. The items shown in the system overview include: ...

  • Page 48: Advanced

    IKARPC-07A-BT In-vehicle Panel PC 5.3 Advanced Use the Advanced menu (BIOS Menu 2) to configure the CPU and peripheral devices through the following sub-menus: WARNING: Setting the wrong values in the sections below may cause the system to malfunction. Make sure that the settings made are compatible with the hardware.

  • Page 49: Acpi Settings

    IKARPC-07A-BT In-vehicle Panel PC 5.3.1 ACPI Settings The ACPI Settings menu (BIOS Menu 3) configures the Advanced Configuration and Power Interface (ACPI) options. Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc. Advanced ACPI Settings Select the highest ACPI...

  • Page 50: Super Io Configuration

    IKARPC-07A-BT In-vehicle Panel PC 5.3.2 Super IO Configuration Use the Super IO Configuration menu (BIOS Menu 4) to set or change the configurations for the serial ports. Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc. Advanced Super IO Configuration...
  • Page 51 IKARPC-07A-BT In-vehicle Panel PC  Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port.  Disable the serial port Disabled  Enable the serial port Enabled EFAULT  Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address.

  • Page 52: Hardware Monitor

    IKARPC-07A-BT In-vehicle Panel PC 5.3.3 Hardware Monitor The Hardware Monitor menu (BIOS Menu 6) displays the CPU and system temperatures. Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc. Advanced PC Health Status CPU Temperature : +44 C System Temperature...

  • Page 53: Power Management

    IKARPC-07A-BT In-vehicle Panel PC 5.3.4 Power Management Use the Power Management menu (BIOS Menu 7) to configure the power management function. Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc. Advanced Current Voltage : +12.1 V Set Low Voltage Warning...

  • Page 54: Sms/Rtc Wake Settings

    IKARPC-07A-BT In-vehicle Panel PC  1 hour  Auto Power Off Delay [20 sec] Use the Auto Power Off Delay option to set the automatic power-off delay time. Configuration options are listed below.  20 sec EFAULT 1 min ...

  • Page 55: Serial Port Console Redirection

    IKARPC-07A-BT In-vehicle Panel PC  Wake system with SMS [Disabled] Use the Wake system with SMS option to enable or disable the system wake on SMS event.  The SMS cannot generate a wake event Disabled EFAULT  The SMS can generate a wake event Enabled ...
  • Page 56 IKARPC-07A-BT In-vehicle Panel PC Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc. Advanced COM1 Console Redirection Console Redirection [Disabled] Enable or Disable > Console Redirection Settings --------------------- : Select Screen  : Select Item Enter: Select +/-: Change Opt.
  • Page 57 IKARPC-07A-BT In-vehicle Panel PC  Bits per second [115200] Use the Bits per second option to specify the serial port transmission speed. The speed must match the other side. Long or noisy lines may require lower speeds.  Sets the serial port transmission speed at 9600.

  • Page 58: Cpu Configuration

    IKARPC-07A-BT In-vehicle Panel PC  Stop Bits [1] Use the Stop Bits option to specify the number of stop bits used to indicate the end of a serial data packet. Communication with slow devices may require more than 1 stop bit.
  • Page 59 IKARPC-07A-BT In-vehicle Panel PC  Min CPU Speed: Lists the minimum CPU processing speed.  Processor Cores: Lists the number of the processor core Intel HT Technology: Indicates if Intel HT Technology is supported by the  CPU.  Intel VT-x Technology: Indicates if Intel VT-x Technology is supported by the CPU.

  • Page 60: Ide Configuration

    IKARPC-07A-BT In-vehicle Panel PC 5.3.8 IDE Configuration Use the IDE Configuration menu (BIOS Menu 11) to change and/or set the configuration of the SATA devices installed in the system. Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc. Advanced...

  • Page 61: Usb Configuration

    IKARPC-07A-BT In-vehicle Panel PC 5.3.9 USB Configuration Use the USB Configuration menu (BIOS Menu 12) to read USB configuration information and configure the USB settings. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced USB Configuration Enables Legacy USB support.

  • Page 62: Chipset

    IKARPC-07A-BT In-vehicle Panel PC 5.4 Chipset Use the Chipset menu (BIOS Menu 13) to access the North Bridge and South Bridge configuration menus. WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction.

  • Page 63: North Bridge Configuration

    IKARPC-07A-BT In-vehicle Panel PC 5.4.1 North Bridge Configuration Use the North Bridge menu (BIOS Menu 14) to configure the north bridge chipset. Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc. Chipset > Intel IGD Configuration Config Intel IGD Settings.

  • Page 64: Intel Igd Configuration

    IKARPC-07A-BT In-vehicle Panel PC 5.4.1.1 Intel IGD Configuration Use the Intel IGD Configuration submenu (BIOS Menu 15) to configure the graphics settings. Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc. Chipset Intel IGD Configuration Select DVMT 5.0 Pre-Allocated (Fixed)

  • Page 65: South Bridge Configuration

    IKARPC-07A-BT In-vehicle Panel PC  DVMT Total Gfx Mem [MAX] Use the DVMT Total Gfx Mem option to specify the maximum amount of memory that can be allocated as graphics memory. Configuration options are listed below.  128MB  256MB ...
  • Page 66 IKARPC-07A-BT In-vehicle Panel PC  Audio Controller [Enabled] Use the Audio Controller option to enable or disable the High Definition Audio controller.  The onboard High Definition Audio controller is disabled Disabled  onboard High Definition Audio controller Enabled EFAULT automatically detected and enabled ...

  • Page 67: Security

    IKARPC-07A-BT In-vehicle Panel PC 5.5 Security Use the Security menu (BIOS Menu 17) to set system and user passwords. Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Password Description Set Administrator Password If ONLY the Administrator’s password is set,...

  • Page 68: Boot

    IKARPC-07A-BT In-vehicle Panel PC 5.6 Boot Use the Boot menu (BIOS Menu 18) to configure system boot options. Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Boot Configuration Select the keyboard...
  • Page 69 IKARPC-07A-BT In-vehicle Panel PC  Quiet Boot [Enabled] Use the Quiet Boot BIOS option to select the screen display when the system boots.  Normal POST messages displayed Disabled  OEM Logo displayed instead of POST messages Enabled EFAULT ...

  • Page 70: Save & Exit

    IKARPC-07A-BT In-vehicle Panel PC 5.7 Save & Exit Use the Save & Exit menu (BIOS Menu 19) to load default BIOS values, optimal failsafe values and to save configuration changes. Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc.
  • Page 71 IKARPC-07A-BT In-vehicle Panel PC  Restore User Defaults Use the Restore User Defaults option to restore the user defaults to all the setup options. Page 61...

  • Page 72: Interface Connectors

    IKARPC-07A-BT In-vehicle Panel PC Chapter Interface Connectors Page 62...

  • Page 73: Peripheral Interface Connectors

    IKARPC-07A-BT In-vehicle Panel PC 6.1 Peripheral Interface Connectors The motherboard of the IKARPC-07A-BT comes with a number of peripheral interface connectors and configuration jumpers. The connector locations are shown in Figure 6-1 and Figure 6-2. The Pin 1 locations of the on-board connectors are also indicated in the diagrams below.

  • Page 74: Internal Peripheral Connectors

    Internal peripheral connectors are found on the motherboard and are only accessible when the motherboard is outside of the chassis. The table below shows a list of the peripheral interface connectors on the IKARPC-07A-BT motherboard. Pinouts of these connectors can be found in the following sections.

  • Page 75: Battery Connector (Bt1)

    IKARPC-07A-BT In-vehicle Panel PC 6.2.1 Battery Connector (BT1) PIN NO. DESCRIPTION VBATT Table 6-2: Battery Connector (BT1) Pinouts 6.2.2 Camera Connector (WEB1) PIN NO. DESCRIPTION USB- USB+ Table 6-3: Camera Connector (WEB1) Pinouts 6.2.3 Clear CMOS Connector (C_CMOS1) PIN NO.

  • Page 76: Lvds Connector (Lvds1)

    IKARPC-07A-BT In-vehicle Panel PC 3.5G_LEDB WIFI_LED HDD_LED Table 6-5: LED Connector (JLED1) Pinouts 6.2.5 LVDS Connector (LVDS1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION VLCD_VCOM LCM_RIN3+ VLCD_VDD LCD_AVDD LCD_AVDD LCM_RIN0- LCM_RIN0+ VCC_LCD_AVDD LCM_RIN1- LCM_LEDK LCM_RIN1+ LCM_LEDK LCD_AVDD LCM_RIN2- LCM_RIN2+ VLCD_VGL LCM_CLK-...

  • Page 77: Microphone Connector (Jmic1)

    IKARPC-07A-BT In-vehicle Panel PC 6.2.6 Microphone Connector (JMIC1) PIN NO. DESCRIPTION JMIC Table 6-7: Microphone Connector (JMIC1) Pinouts 6.2.7 mSATA Module Socket (SATA1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION VCC3 TPC_SAT0_RXP_C VCC3 TPC_SAT0_RXN_C TPC_SAT0_TXN_C TPC_SAT0_TXP_C VCC3 VCC3 Page 67...

  • Page 78: Pcie Mini Socket For 3.75G Module (Mini_Pcie1)

    IKARPC-07A-BT In-vehicle Panel PC PIN NO. DESCRIPTION PIN NO. DESCRIPTION VCC3 Table 6-8: mSATA Module Socket (SATA1) Pinouts 6.2.8 PCIe Mini Socket for 3.75G Module (MINI_PCIE1) This socket supports USB interface only and voice function. PIN NO. DESCRIPTION PIN NO.

  • Page 79: Pcie Mini Socket For Wireless Module (Mini_Pcie2)

    IKARPC-07A-BT In-vehicle Panel PC PIN NO. DESCRIPTION PIN NO. DESCRIPTION VCC1.5 VCC3 Table 6-9: PCIe Mini Socket for 3.75G Module (MINI_PCIE1) Pinouts 6.2.9 PCIe Mini Socket for Wireless Module (MINI_PCIE2) This socket supports USB interface and PCIe interface. PIN NO.

  • Page 80: Programming Connector (Jmcu1)

    IKARPC-07A-BT In-vehicle Panel PC PIN NO. DESCRIPTION PIN NO. DESCRIPTION VCC1.5 VCC3 Table 6-10: PCIe Mini Socket for Wireless Module (MINI_PCIE2) Pinouts 6.2.10 Programming Connector (JMCU1) PIN NO. DESCRIPTION MCLR VCC5 ICSP_CLK ICSP_DAT Table 6-11: Programming Connector (JMCU1) Pinouts 6.2.11 Programming Connector (JOBD1) PIN NO.

  • Page 81: Spi Flash Connector (Jspi1)

    IKARPC-07A-BT In-vehicle Panel PC 6.2.13 SPI Flash Connector (JSPI1) PIN NO. DESCRIPTION VCC3 MISO MOSI Table 6-14: SPI Flash Connector (JSPI1) Pinouts 6.2.14 Touch Panel Connector (TOUCH1) PIN NO. DESCRIPTION VCC3 USB- USB+ Table 6-15: Touch Panel Connector (TOUCH1) Pinouts...

  • Page 82: External Peripheral Connectors

    IKARPC-07A-BT In-vehicle Panel PC 6.3 External Peripheral Connectors The table below shows a list of the external peripheral interface connectors on the IKARPC-07A-BT motherboard. Pinouts of these connectors can be found in Section 3.6. Connector Type Label OBD-II, LAN and USB connector...

  • Page 83: A Regulatory Compliance

    IKARPC-07A-BT In-vehicle Panel PC Appendix Regulatory Compliance Page 73...
  • Page 84 IKARPC-07A-BT In-vehicle Panel PC DECLARATION OF CONFORMITY This equipment is in conformity with the following EU directives: EMC Directive (2004/108/EC, 2014/30/EU)  Low-Voltage Directive (2006/95/EC, 2014/35/EU)  RoHS II Directive (2011/65/EU, 2015/863/EU)  Ecodesign Directive 2009/125/EC  If the user modifies and/or install other devices in the equipment, the CE conformity declaration may no longer apply.
  • Page 85 IKARPC-07A-BT In-vehicle Panel PC Español [Spanish] IEI Integration Corp declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/EU. Ελληνική [Greek] IEI Integration Corp ΔΗΛΩΝΕΙ ΟΤΙ ΕΞΟΠΛΙΣΜΟΣ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ...
  • Page 86 IKARPC-07A-BT In-vehicle Panel PC Româna [Romanian] IEI Integration Corp declară că acest echipament este in conformitate cu cerinţele esenţiale şi cu celelalte prevederi relevante ale Directivei 2014/53/EU. Slovensko [Slovenian] IEI Integration Corp izjavlja, da je ta opreme v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 2014/53/EU.
  • Page 87 IKARPC-07A-BT In-vehicle Panel PC FCC WARNING This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and  This device must accept any interference received, including interference ...

  • Page 88: B Safety Precautions

    IKARPC-07A-BT In-vehicle Panel PC Appendix Safety Precautions Page 78...

  • Page 89: Safety Precautions

     Electric shocks can occur if the IKARPC-07A-BT chassis is opened when it is running. To avoid risk of electric shock, this device must only be connected to a supply mains with protective earth.

  • Page 90: Anti-Static Precautions

    Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IKARPC-07A-BT. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the IKARPC-07A-BT is opened and any of the electrical components are handled, the following anti-static precautions are strictly adhered to.

  • Page 91: Product Disposal

    IKARPC-07A-BT In-vehicle Panel PC B.1.3 Product Disposal CAUTION: Risk of explosion if battery is replaced by an incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations.  Outside the European Union–If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority so as to comply with the correct disposal method.

  • Page 92: Maintenance And Cleaning Precautions

    Some components in the IKARPC-07A-BT may only be cleaned using a product specifically designed for the purpose. In such case, the product will be explicitly mentioned in the cleaning tips. Below is a list of items to use when cleaning the IKARPC-07A-BT. ...
  • Page 93 IKARPC-07A-BT In-vehicle Panel PC  Water or rubbing alcohol–A cloth moistened with water or rubbing alcohol can be used to clean the device.  Using solvents–The use of solvents is not recommended when cleaning the device as they may damage the plastic parts.

  • Page 94: Cobd-Ii Reader Command

    IKARPC-07A-BT In-vehicle Panel PC Appendix OBD-II Reader Command Page 84...

  • Page 95: Select A Chip Initial Mode: Update F/W Or Run F/W

    IKARPC-07A-BT In-vehicle Panel PC C.1 Select a Chip Initial Mode: UpDate F/W or RUN F/W  AP sends query  F/W receives query Enter Boot Mode Enter RUN Mode C.2 Boot Mode  Launch AP: P1618QP (Pic18F Bootloader ) ...
  • Page 96 IKARPC-07A-BT In-vehicle Panel PC F/W returns (after receiving query) Select a mode to send Tele mode response CAN S mode response Enter Tele mode to respond Enter CAN S mode to respond Page 86...

  • Page 97: Into Can_Standard V2.2.B (Can Standard)

    IKARPC-07A-BT In-vehicle Panel PC C.4 Into CAN_Standard V2.2.B (CAN standard)  AP sends query  F/W receives query 0x0A 0x0D Sent by xxx Baud 0x00 Set CAN Reserved baud 0x00 TxIDE RTR ID(1 ID(2 ID(3 ID(4 Set to Reserved B0 B1...
  • Page 98 IKARPC-07A-BT In-vehicle Panel PC complete 0x0A Menu setup complete TxID ID(1) ID(2) ID(3) ID(4) 0x0A Read query setup Read menu D(1) D(2) D(3) D(4) 1ID( 1ID( 1ID( 1ID( 2ID( 2ID( 2ID( 2ID( D(1) D(2) D(3) D(4) setup RxID 0x0A 1ID(...

  • Page 99: Into Telematics (Vehicel Information)

    IKARPC-07A-BT In-vehicle Panel PC C.5 Into Telematics (Vehicel Information)  F/W:Telematics  AP: Telematics V1.005  AP sends query  F/W receives query Scan all Scan all Scan OBD-II Scan J1939 Scan FMS OBD-II input PID-1 OBD-II input PID-2 OBD-II...
  • Page 100 IKARPC-07A-BT In-vehicle Panel PC Reserved J1939 input PSPF FMS input PSPF Version  F/W returns (after receiving query) device is scanned Devices Scanned Page 90...
  • Page 101 IKARPC-07A-BT In-vehicle Panel PC OBD packet format (ASCII code) OBD packet has five different format, they are: 1. CAN 11bits 250 2. CAN 29bits 250 3. CAN 11bits 500 4. CAN 29bits 500 5.Scanning Each format has its input code, they are:...
  • Page 102 IKARPC-07A-BT In-vehicle Panel PC Byte 4 define as A. (same with the PID code table on Wikipedia) Byte 5 define as B. (same with the PID code table on Wikipedia) Byte 6 define as C. (same with the PID code table on Wikipedia) Byte 7 define as D.

  • Page 103: D Watchdog Timer

    IKARPC-07A-BT In-vehicle Panel PC Appendix Watchdog Timer Page 93...
  • Page 104 IKARPC-07A-BT In-vehicle Panel PC NOTE: The following discussion applies to DOS. Contact IEI support or visit the IEI website for drivers for other operating systems. The Watchdog Timer is a hardware-based timer that attempts to restart the system when it stops working.
  • Page 105 IKARPC-07A-BT In-vehicle Panel PC NOTE: The Watchdog Timer is activated through software. The software application that activates the Watchdog Timer must also deactivate it when closed. If the Watchdog Timer is not deactivated, the system will automatically restart after the Timer has finished its countdown.

  • Page 106: E Hazardous Materials Disclosure

    IKARPC-07A-BT In-vehicle Panel PC Appendix Hazardous Materials Disclosure Page 96...
  • Page 107 IKARPC-07A-BT In-vehicle Panel PC The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
  • Page 108 IKARPC-07A-BT In-vehicle Panel PC 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯 醚 (Pb) (Hg) (Cd) (CR(VI)) (PBB) (PBDE) 壳体 显示 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T 11363-2006 (现由 GB/T 26572-2011 取代) 标准规定的限量要求以下。...

Table of Contents