SmartNode 4970A User Manual
SmartNode 4970A front panel
Figure 3
shows SmartNode 4970A front panel LEDs, the LED definitions are listed in
LED
Note
If an error occurs, all LEDs will flash once per second.
Power
Run
VoIP Link
Ethernet Link
SmartNode 4970A front panel
Figure 3. SmartNode 4970A front panel
Table 3. SN4970A Front and Rear panel LEDs
When lit, indicates power is applied.
When lit, the unit is in normal operation. Flashes once per second during
boot (startup).
•
On indicates the gateway is registered to a SIP server, or, in the case of direct
routing, has at least one active VoIP connection.
•
Off indicates the unit is not configured or registered, or has no active direct-
routed VoIP connection.
•
Flashing green indicates that the unit is attempting to register or has failed
to register.
•
On when the Ethernet connection on the corresponding port has a
link indication.
Description
1 • General information
table 3
on page 16.
16