Table of Contents
Advertisement
SmartNode 4970A User Manual
Introduction
The Reset button (see
figure 16
•
Reboot the SmartNode device (see section
Power LED is lit"
on page 52)
•
Erase the startup-config settings, which is followed by a SmartNode device reboot as indicated by the slow
blinking of all LEDs (see section
is lit"
on page 52)
•
Factory reset, which is followed by a device reboot as indicated by the fast blinking of all LEDs (see section
"Resetting the SmartNode device when it is operating and the Power LED is lit"
•
Troubleshoot the SmartNode device if it is not booting properly (see section
when it is initially powered off "
Resetting the SmartNode device when it is operating and the Power LED
is lit
The Reset button has the following behaviors depending on how many seconds (see
pressed (see
table 9
on page 53 for the results from pressing the button).
Figure 17. Reset button periods (in seconds) for performing actions
Introduction
on page 52) is used to do the following:
"Resetting the SmartNode device when it is operating and the
"Resetting the SmartNode device when it is operating and the Power LED
on page 53)
Figure 16. SN4970A Reset button
F • Reset Button Functions
on page 52)
"Resetting the SmartNode device
figure
17) the button is
52
Advertisement
Table of Contents
