Set Admin Password; Set Unlock Pattern - HIKVISION DS-7716NI-I4/16P Quick Start Manual

1
C O N N E C T D E V I C E S
1. Connect AC power cord to the NVR.
2. Connect NVR to LAN using Cat 5e cable.
3. Connect video monitor(s) to NVR using HDMI and/or VGA cables, as appropriate.
4. Connect mouse to USB port (wireless mouse can be used in lieu of included mouse).
5. Connect to audio I/O using RCA connectors.
2
S T A R T T H E N V R
1. Plug AC power cord into 110 to 240 VAC outlet (surge suppressor is recommended).
2. Turn power switch on. Power indicator LED will turn
3. After startup, power indicator LED will remain GREEN.
3
L O C A L A C T I V A T I O N
System access requires a secure, user-assigned password.
GREEN
to indicate unit is starting.
 Set Admin Password
First-time access requires user to create an
admin password.
1. Input same password in Create New
Password and Confirm New Password
text fields.
Strong Password REQUIRED
Password must contain 8 to 16 characters,
combining numbers, lower and upper case
letters, and special characters. At least two
types of the above-mentioned characters are
required. Also, reset password regularly.
2. Click OK to save password and activate
device.
 Set Unlock Pattern
Admin user will be prompted to configure an
unlock pattern for login in place of a password.
1. Hold down left mouse button and draw a
pattern by connecting at least four dots on
the screen, with each dot connected only
once). Release mouse button when done.
2. Draw the same pattern again to confirm it.
NOTE: If you forget your pattern, select
Switch User to display the normal
login dialog box.
 Log In (Unlock Pattern)
1. Draw the unlock pattern to unlock system.