Recording Schedule - HIKVISION DS-7716NI-I4/16P Quick Start Manual

1 0
A D D I P C A M E R A S ( c o n t i n u e d )



11
V I E W L I V E V I D E O
Live View displays real-time video.
12
S E T U P R E C O R D I N G
The system defaults to continuously record video at 8 fps, or at 15 fps when motion is detected.
 Recording Schedule
Default is to continuously record everyday. Do the following to change the recording schedule:
1. Go to MENU > RECORDING CONFIGURATION > SCHEDULE.
2. Choose CONTINUOUS or EVENT/(MOTION DETECTION) under the Type pull-down menu.
3. Use cursor to select (days will turn blue [continuous] or yellow [event/motion detect]) or deselect
(days will turn gray [off]) the calendar days you wish to record.






NVR CAMERA CHANNELS
Cameras connected to NVR
 PLAY
Play camera's live video
 EDIT (Pencil)
Change IP address (in LAN range)
CAMERA LIST (White)
Added cameras 
LAN CAMERAS LIST (Yellow)
Detected cameras will appear here
CAMERA CONNECTED
Shows camera is connected
CAMERA DISCONNECTED
Shows disconnected camera
PASSWORD VISIBLE
Show passwords
ENABLE H.265
Use H.265
Icons in the upper right of screen show
each camera's record and alarm status.
• Alarm (video loss, tampering, motion
detection, sensor alarm, or VCA
alarm)
• Record (manual record, continuous
record, motion detection, alarm, or
VCA triggered record)
• Event/Exception (event and
exception information appears at
lower-left corner of screen)