HIKVISION DS-7716NI-I4/16P Quick Start Manual page 11

1 2
S E T U P R E C O R D I N G ( c o n t i n u e d )
4. Apply time settings as desired.
5. Press APPLY.
 Motion Detection Areas
To define the image areas that Motion Detection will monitor for each camera, do the following:
1. Go to MENU > RECORDING CONFIGURATION > MOTION DETECT.
Use Camera pull-down menu to select camera to configure.
2.
3. Check the Enable Motion Detection checkbox to enable motion detection.
Use Sensitivity boxes to select how responsive detection should be (the more green boxes lit,
4.
the greater the sensitivity).
5. Drag a grid(s) over the area(s) on the image that will be sensitive to motion.
Click the Settings Set button to configure Arming Schedule (when detection is enabled) and
6.
Linkage Actions (what action(s) to take when motion is detected).







 


 TYPE
Motion or Continuous (default)
 COLOR
Shows Recording Schedule days:
• Blue=Continuous
• Yellow=Event (motion/alarm)
• Grey=None
 TIMES
Customize schedule times (ignore for
"motion only" recording)
 ADD
Press to add time settings to
schedule
 ENABLE SCHEDULE
If not checked, camera will not record
 CAMERA
Select camera
ENABLE MOTION DETECTION
Click to enable/disable
 MOTION GRID
Draw grid area to detect motion
SENSITIVITY
Select # of green squares to set

sensitivity

 SETTINGS/SET
Configure arming schedule and
linkage actions
APPLY
Click to apply settings