A D D I P C A M E R A S - HIKVISION DS-7716NI-I4/16P Quick Start Manual

9
S E T U P H I K - C O N N E C T P 2 P C L O U D S E R V I C E ( c o n t i n u e d )
3)
4)
5)
2. To see a device's video stream on the Hik-Connect or iVMS-4500 mobile app, add the device.
1)
2)
3)
10

A D D I P C A M E R A S

Right click a window in Live View mode to display the menu.
1.
Click Menu to display Menu choices.
2.
3. Click Cameras Setup to display the Add Cameras window.
4. Add camera(s) as follows:
 Hikvision Camera Connected to Unit's PoE Port — Will automatically be added to an NVR
camera channel (D
 Hikvision Camera Connected to the Network but Not Unit's PoE Ports — Will automatically be
detected and displayed at bottom of the camera list in yellow. Must be added to an NVR camera
channel manually:
Server Address must be "dev.hik-connect.com." If not, check the Custom checkbox, and type
"dev.hik-connect.com."
Click the Apply button. Status will change to "Online" (if all settings are correct).
Note the Serial Number and Verification Code shown here (for use when registering the NVR in
your Hik-Connect account) or use the QR code displayed.
Login to Hik-Connect mobile app with your user name, e-mail, or mobile number and password.
On the Home screen, click the "+" button (upper right corner).
Enter the device's information.
 If you have the device's QR Code: Use the QR Code Scanner to scan the device's QR Code.
 If you do not have the device's QR Code: Enter the device information manually:
a. Click the Edit (pencil) icon on top right corner.
b. Enter device serial number (device must be online), then click the OK button.
c. When the device appears on the "Results" screen, click the Add button.
d. Enter device's 6-character Verification Code (all upper case), then click the OK button.
e. Click the Finish button.
x
) and will be visible on the camera list in white within two minutes.