HIKVISION DS-7716NI-I4/16P Quick Start Manual page 6

5
S E T D A T E A N D T I M E
1. Go to MENU > SYSTEM CONFIGURATION > GENERAL.
6
S E T U P N E T W O R K A C C E S S
1. A network connection is required to access the cameras remotely.
2. Go to MENU > SYSTEM CONFIGURATION > NETWORK.
3. Enable DHCP (check the checkbox).
Press Refresh button to update the IPv4 address, subnet mask, and IPv4 default gateway.
4.
5. Disable DHCP (uncheck the checkbox).
6. Change "Preferred DNS Server" value to 8.8.8.8 (leave Alternate DNS Server blank).









 DATE/TIME
Date and time settings
 TIME ZONE
Time zone and daylight savings
time settings
 ENABLE NTP
Network Time Protocol settings
 GENERAL TAB
NIC TYPE
ENABLE DHCP
REFRESH
IP V4 ADDRESS
PREFERRED DNS SERVER
ALTERNATE DNS SERVER

Select this tab
Set LAN type
Check box so that router will
assign IP address
Press to update values
Default 192.0.0.64
Default is 8.8.8.8
Leave blank