Table of Contents
Advertisement
3.
BIOS CONFIGURATION
Award's BIOS ROM has a built-in Setup program that allows
users to modify the basic system configuration. This type of
information is stored in battery-backed CMOS SRAM so that it
retains the Setup information when the power is turned off.
3.1
Entering Setup
n
To Enter Setup Before Boot Press
<Del>
Power ON the computer and press <Del> immediately will allow
you to enter Setup. The other way to enter Setup is to power on
the computer, when the below message appears briefly at the
bottom of the screen during the POST (Power On Self Test),
press <Del> key.
If the message disappears before you respond and you still wish
to enter Setup, then please power off/on the board or reset the
system by shorting pin9-10 on CN6.
Chapter 3 Award BIOS Setup
33
Advertisement
Table of Contents
