Aaeon SBC-657 User Manual page 51

3.5.3 Drive A / Drive B type
None
360K, 5.25 in
1.2M, 5.25 in
720K, 3.5 in
1.44M, 3.5 in
2.88M, 3.5 in
3.5.4 Halt On
During the power-on-self-test (POST), the computer stops if the
BIOS detects a hardware error. You can tell the BIOS to ignore
certain errors during POST and continue the boot-up process.
The choices: All,But Keyboard; All, But Diskette; All, But
Disk/Key; All Errors; No Errors.
3.5.5 Select Display Device
SBC-657 can be used with various visual display peripherals. It
can also display the both CRT and Flat Panel(TFT or DSTN)
simultaneously. This function allows the end user to select the
type of visual display peripheral they are incorporating with the
SBC-657 single board computer.
The choices: LCD, CRT, LCD+CRT
3.5.6 Panel Type
SBC-657 can be used with various display panels. Please select
the type of panel you are incorporating with our single board
computer. Consult your panel manual for detail information.
The choices: 640x480 TTL, 800x600 TTL, 1024x768 TTL,
800x600 1ch LVDS, 1024x768 1ch LVDS, 1024 x 768 2ch
LVDS
No diskette drive installed
5-1/4 inch PC-type standard drive;
360 kilobyte capacity
5-1/4 inch AT-type high-density
drive; 1.2 megabyte capacity
3-1/2 inch double-sided drive;
720 kilobyte capacity
3-1/2 inch double-sided drive;
1.44 mega byte capacity
3-1/2 inch double-sided drive;
2.88 mega byte capacity
Chapter 3 Award BIOS Setup 41